Labels:text | number | font | black and white | parallel | receipt | screenshot OCR: TEST RESULT ACTION 8. Using an ohmmeter, test the Continuity. REPLACE Cruise Control Switch. GRY/BLK (87) wire for resistance No continuity. LOCATE and REPAIR open in between Cruise Control Switch and Cruise Control Module. GRY/BLK (87) wire between Cruise Control Switch and Cruise Control Module. 9. Disconnect the TCC/Stoplamp Test lamp lights. GO to step 10. Switch. Connect test a lamp from |Test lamp does not light. ORN (140) wire at TCC/Stoplamp LOCATE and REPAIR open in ORN Switch to ground. (140) wire between the IP Fuse Block and TCC/Stoplamp Switch. 10. Connect a test lamp from BRN Test lamp lights. GO to step 11. (441) wire at TCC/Stoplamp Test lamp does not light. Switch to ground. LOCATE and REPAIR open in BRN (441) wire between the I/P Fuse Block and TCC/Stoplamp Switch. 11. Using an ohmmeter, CHECK for Continuity. GO to step 12. continuity between TCC/Stoplamp No continuity. Switch Terminals C and D with REPLACE TCC/Stoplamp Switch. the Switch in its normal at rest (Brakes not applied) position. 12. Using an ohmmeter, CHECK for No continuity. GO to step 13. continuity between TCC/Stoplamp |Continuity. Switch Terminals C and D with REPLACE TCC/Stoplamp Switch. the Switch in the Brakes applied position. 13. Using an ohmmeter, CHECK for No continuity. GO to step 14. continuity between TCC/Stoplamp Continuity. Switch Terminals A and B with REPLACE TCC/Stoplamp Switch. the Switch in its normal (Brakes not applied) position. 14. Using an ohmmeter, CHECK for Continuity. GO to step 15. continuity between TCC/Stoplamp No continuity. Switch Terminals A and B with REPLACE TCC/Stoplamp Switch. the Switch in the Brakes applied position. 15. Using an ohmmeter, test the WHT Continuity, GO to step 16. (17) wire for continuity between No continuity. TCC/Stoplamp Switch and Cruise LOCATE and REPAIR open in WHT Control Module. (17) wire between Cruise Control Module and TCC/Stoplamp Switch. 16. Using an ohmmeter, test the WHT Continuity. GO to step 17. (17) wire for continuity between TCC/Stoplamp Switch and I/P No continuity. LOCATE and REPAIR open in WHT Fuse Block. (17) wire between I/P Fuse Block and TCC/Stoplamp Switch. 17. Using an ohmmeter, test the' PPL |Continuity. GO to step 18. (420) wire for continuity between No continuity. TCC/Stoplamp Switch and Cruise LOCATE and REPAIR open in PPL Control Module. (420) wire between Cruise Control Module and TCC/Stoplamp Switch.
(.png)
